Repair board
Matching board sections selected according to thickness and intended use.
Repair and restoration
Drywall repairs that restore a clean, stable surface.
We repair damaged boards, open joints, cracks, holes and corners, then prepare the affected area for a consistent final finish.
The repair method is matched to the type and cause of damage.
A lasting repair starts with understanding whether the problem is limited to the surface or connected to movement, moisture, impact or an underlying construction issue.
Holes and damaged board sections
Local cut-out and replacement of damaged areas, followed by joint reinforcement and finishing.
Cracks and open joints
Assessment, preparation, reinforcement and refilling of cracks or failed board joints where appropriate.
Corners and edge damage
Repair or replacement of damaged corner profiles and restoration of straight, clean edges.
Preparation for repainting
Sanding, spot priming and blending of the repaired area before the final coating stage.
Materials & finishes
Typical products we specify for this work — chosen for finish quality, durability, and clean results.
Reinforcement
Joint tape or suitable mesh used where the repair detail requires additional support.
Filling compounds
Repair, jointing and finishing compounds selected for the depth and surface requirement.
ProtektorSpot primer
Spot or full-area primer used as required before repainting.
CaparolCommon questions.
No. Repeated or structural movement must be understood before a cosmetic repair is applied. Some cracks require reinforcement or correction of the underlying cause.
The source of moisture must be stopped and the affected area must be dry before rebuilding and finishing. Damaged or contaminated materials may need to be removed.
The goal is a consistent surface, but the final appearance also depends on lighting, texture, paint age and whether the full wall or ceiling is repainted.